Mga Tampok:
- Broadband
- Maliit na Sukat
- Mababang Pagkawala ng Insertion
Ang RF power divider/combiner ay isang device na malawakang ginagamit sa mga wireless na sistema ng komunikasyon. Ang pangunahing function nito ay upang hatiin ang isang input signal sa maraming output signal habang pinapanatili ang orihinal na mga katangian ng signal, o upang synthesize ang maramihang input signal sa isang output. Para sa isang uri ng passive power divider, ang prinsipyo ng disenyo ng isang 8-way na power divider/combiner ay ang bumuo ng branch network gamit ang microstrip branch lines, at gumamit ng quarter wavelength microstrip transmission lines para sa pagtutugma ng impedance, upang ang impedance ng bawat port ay katumbas ng 50 ohms. Habang sumasanga, ang pinakamataas na kahusayan ng paghahatid ng enerhiya ay nakakamit.
1. Kapag gumagamit ng 8-way na power divider/combiner bilang power divider, mayroong 1 input port at 8 output port; Kapag ginamit bilang isang combiner, mayroong 8 input port at 1 output port.
2. Ang pagkakaroon ng mga de-koryenteng katangian tulad ng malawak na dalas ng pagpapatakbo, mababang pagkawala ng pagpasok, mataas na pakinabang at paghihiwalay.
3. Mature na teknolohiya at matatag na pagganap. Upang mabawasan ang kahusayan ng paghahatid na dulot ng pagmuni-muni ng signal, nagsagawa kami ng disenyo ng pagtutugma ng impedance at na-optimize ang port standing wave ratio; Upang bawasan ang pagmuni-muni ng signal na dulot ng mga epekto ng paglipat, lumipat mula sa mga coaxial connector patungo sa mga linya ng microstrip; Upang palawakin ang bandwidth at mapanatili ang mababang standing wave ratio, pagbutihin ang impedance matching branch na disenyo; Para maiwasan ang resonance sa loob ng operating frequency range, i-optimize ang cavity structure.
Ang mga 8-way na power splitter/combiner ay may maraming aplikasyon sa larangan ng RF, na nagbibigay ng mga signal para sa pagsubok, pag-synthesize ng feed papunta at mula sa mga antenna, paghahati ng mga signal na naipadala at natanggap na sa mga linya ng telepono, at iba't ibang layunin.
Ang Qualwave inc. magbigay ng 8-way na power splitter/combiner na may frequency range na DC~67GHz, power na hanggang 600W, maximum insertion loss na 23dB, at minimum isolation na 6dB. Nag-aalok kami ng iba't ibang opsyon sa connector gaya ng SMA, N, TNC, N&SMA, 2.4mm, 2.92mm, atbp. Ang aming mga produkto ay malawakang ginagamit at pinuri sa maraming larangan.
Numero ng Bahagi | Dalas ng RF(GHz, Min.) | Dalas ng RF(GHz, Max.) | Kapangyarihan bilang Divider(W) | Kapangyarihan bilang Combiner(W) | Pagkawala ng Insertion(dB, Max.) | Isolation(dB, Min.) | Balanse ng Amplitude(±dB,Max.) | Phase Balanse(±°, Max.) | VSWR(Max.) | Mga konektor | Lead Time(Linggo) |
---|---|---|---|---|---|---|---|---|---|---|---|
QPD8-0-2000-2 | DC | 2 | 2 | - | 19 | 17.5 | ±0.5 | ±1 | 1.25 | N, TNC | 2~3 |
QPD8-0-2000-2-S | DC | 2 | 2 | - | 19 | 17.5 | 0.3 | ±3 | 1.15 | SMA | 2~3 |
QPD8-0-3000-2-S | DC | 3 | 2 | - | 18±1.5 | 18 | ±1.0 | - | 1.3 | SMA | 2~3 |
QPD8-0-3000-2-N | DC | 3 | 2 | - | 19.5 | 18.5 | ±0.5 | ±2 | 1.3 | N | 2~3 |
QPD8-0-4000-2-S | DC | 4 | 2 | - | 19.5 | 17 | 0.8 | ±8 | 1.4 | SMA | 2~3 |
QPD8-0-6000-2-S | DC | 6 | 2 | - | 18±2.5 | 18 | ±1.2 | - | 1.5 | SMA | 2~3 |
QPD8-0-8000-2 | DC | 8 | 2 | - | ±2(uri) | 16 | ±5 | ±90 | 1.9 | SMA, N | 2~3 |
QPD8-0-10000-R5-S | DC | 10 | 0.5 | - | 18±2.8 | - | ±2 | - | 1.6 | SMA | 2~3 |
QPD8-0-18000-1-S | DC | 18 | 1 | - | 23 | 10 | ±1.2 | - | 2.5 | SMA | 2~3 |
QPD8-0-26500-2-S | DC | 26.5 | 2 | - | 3 | 18 | 2 | 2 | 1.6 | SMA | 2~3 |
QPD8-0-40000-2-K | DC | 40 | 2 | - | 4 | 18 | 2 | 2 | 1.6 | 2.92mm | 2~3 |
QPD8-2-250-1-S | 0.002 | 0.25 | 1 | - | 1 | 25 | ±0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-5-500-10-N | 0.005 | 0.5 | 10 | - | 1.5 | 20 | 0.3 | ±5 | 1.25 | N | 2~3 |
QPD8-5-1000-1-S | 0.005 | 1 | 1 | 0.25 | 3 | 18 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-5-1000-50-S | 0.005 | 1 | 50 | 50 | 1.6 | 12 | ±0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-5-2000-1-S | 0.005 | 2 | 1 | 1 | 5 | 15 | ±0.5 | ±5 | 1.8 | SMA | 2~3 |
QPD8-10-100-1-S | 0.01 | 0.1 | 1 | 0.5 | 1 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-20-100-K15-S | 0.02 | 0.1 | 150 | 150 | 1.3 | 20 | 0.2 | ±5 | 1.5 | SMA | 2~3 |
QPD8-20-520-K2-S | 0.02 | 0.52 | 200 | 200 | 1 | 12 | 0.5 | 5 | 1.6 | SMA | 2~3 |
QPD8-30-500-K1-N | 0.03 | 0.5 | 100 | 100 | 0.75 | 20 | 0.3 | ±5 | 1.4 | N | 2~3 |
QPD8-30-3000-2-S | 0.03 | 3 | 2 | - | 18.5 | 17 | 0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-70-500-K15-S | 0.07 | 0.5 | 150 | 150 | 1 | 12 | 0.2 | 3 | 1.5 | SMA | 2~3 |
QPD8-70-1010-K6-NS | 0.07 | 1.01 | 600 | 600 | 1.8 | 8 | 0.3 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-80-500-30-S | 0.08 | 0.5 | 30 | 2 | 1.8 | 18 | ±0.2 | ±3 | 1.3 | SMA | 2~3 |
QPD8-80-1000-K2-S | 0.08 | 1 | 200 | 200 | 1.3 | 15 | ±0.2 | ±5 | 1.35 | SMA | 2~3 |
QPD8-80-4000-30-S | 0.08 | 4 | 30 | 2 | 6.6 | 13 | 0.4 | ±8 | 1.55 | SMA | 2~3 |
QPD8-98-102-30-N | 0.098 | 0.102 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | N | 2~3 |
QPD8-100-700-1-S | 0.1 | 0.7 | 1 | 0.5 | 2 | 18 | 0.4 | ±8 | 1.5 | SMA | 2~3 |
QPD8-100-700-30-S | 0.1 | 0.7 | 30 | 2 | 2 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-100-2000-30-S | 0.1 | 2 | 30 | 2 | 3.4 | 18 | 0.3 | ±4 | 1.35 | SMA | 2~3 |
QPD8-100-3000-30-S | 0.1 | 3 | 30 | 2 | 6.5 | 18 | 0.3 | ±6 | 1.35 | SMA | 2~3 |
QPD8-100-4000-30-SMS | 0.1 | 4 | 30 | 2 | 6.5 | 12 | 0.5 | ±6 | 1.55 | SMA | 2~3 |
QPD8-108-138-50-N | 0.108 | 0.138 | 50 | 50 | 0.8 | 15 | 0.2 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-30-S | 0.2 | 1 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-1000-K1-S | 0.2 | 1 | 100 | 10 | 1 | 20 | ±0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-200-2000-30-S | 0.2 | 2 | 30 | 2 | 2.8 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-200-2300-30-S | 0.2 | 2.3 | 30 | 2 | 3 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-200-6000-30-S | 0.2 | 6 | 30 | 2 | 6.8 | 17 | 0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-223-235-30-S | 0.223 | 0.235 | 30 | 2 | 1.2 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-240-30-S | 0.24 | 30 | 2 | 0.6 | 20 | ±0.2 | ±2 | 1.2 | SMA | 2~3 | |
QPD8-300-500-30-S | 0.3 | 0.5 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.25 | SMA | 2~3 |
QPD8-300-3000-30-NS | 0.3 | 3 | 30 | 2 | 2.6 | 20 | 0.3 | ±4 | 1.3 | SMA&N | 2~3 |
QPD8-300-6000-30-S | 0.3 | 6 | 30 | 2 | 4.8 | 20 | 0.3 | ±6 | 1.4 | SMA | 2~3 |
QPD8-300-18000-20-S | 0.3 | 18 | 20 | 1 | 5 | 7 | ±0.5 | ±8 | 2.3 | SMA | 2~3 |
QPD8-400-900-30-B | 0.4 | 0.9 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.25 | BNC | 2~3 |
QPD8-400-4000-30-N | 0.4 | 4 | 30 | 2 | 2.4 | 20 | 0.4 | ±4 | 1.35 | N | 2~3 |
QPD8-400-6000-30-S | 0.4 | 6 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-450-6000-30-S | 0.45 | 6 | 30 | 2 | 3.2 | 18 | 0.3 | ±4 | 1.35 | SMA | 2~3 |
QPD8-470-510-10-S | 0.47 | 0.51 | 10 | - | 2 | 20 | ±0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-470-510-20-S | 0.47 | 0.51 | 20 | - | 1.5 | 20 | ±0.5 | ±5 | 1.3 | SMA | 2~3 |
QPD8-500-2000-30-S | 0.5 | 2 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | SMA | 2~3 |
QPD8-500-3000-30 | 0.5 | 3 | 30 | 2 | 1.8 | 20 | ±0.3 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-500-4000-30-NS | 0.5 | 4 | 30 | 2 | 2 | 20 | 0.3 | ±4 | 1.3 | SMA&N | 2~3 |
QPD8-500-4000-30-S | 0.5 | 4 | 30 | 2 | 2.3 | 20 | 0.2 | ±4 | 1.3 | SMA | 2~3 |
QPD8-500-6000-30 | 0.5 | 6 | 30 | 2 | 3 | 20 | ±0.2 | ±6 | 1.4 | SMA, N | 2~3 |
QPD8-500-8000-20 | 0.5 | 8 | 20 | 1 | 4 | 18 | 0.4 | ±5 | 1.5 | SMA, N | 2~3 |
QPD8-500-18000-20-S | 0.5 | 18 | 20 | 1 | 6 | 14 | 0.8 | ±10 | 2 | SMA | 2~3 |
QPD8-500-26500-30-S | 0.5 | 26.5 | 30 | 2 | 8 | 18 | ±0.5 | ±10 | 1.6 | SMA | 2~3 |
QPD8-500-40000-20-K | 0.5 | 40 | 20 | 2 | 11 | 15 | ±0.8 | ±12 | 1.8 | 2.92mm | 2~3 |
QPD8-600-2000-30-S | 0.6 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-600-6000-30 | 0.6 | 6 | 30 | 2 | 2.8 | 18 | 0.4 | ±5 | 1.4 | SMA, N | 2~3 |
QPD8-600-8000-30-S | 0.6 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-700-3000-30 | 0.7 | 3 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | SMA, N | 2~3 |
QPD8-700-4000-30-N | 0.7 | 4 | 30 | 2 | 1.8 | 20 | ±0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-750-1710-30-S | 0.75 | 1.71 | 30 | 2 | 0.6 | 20 | 0.3 | ±3 | 1.2 | SMA | 2~3 |
QPD8-800-2000-30-S | 0.8 | 2 | 30 | 2 | 1 | 20 | 0.3 | ±4 | 1.25 | SMA | 2~3 |
QPD8-800-2500-30-N | 0.8 | 2.5 | 30 | 2 | 1.4 | 20 | 0.4 | ±4 | 1.25 | N | 2~3 |
QPD8-800-2700-30-N | 0.8 | 2.7 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-800-4200-30-S | 0.8 | 4.2 | 30 | 2 | 1.8 | 20 | 0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-800-4200-K2-NS | 0.8 | 4.2 | 200 | - | 1.2 | 6 | 0.25 | ±7 | 1.3 | SMA&N | 2~3 |
QPD8-800-5000-20-S | 0.8 | 5 | 20 | 1 | 1.5 | 20 | ±0.4 | ±3 | 1.4 | SMA | 2~3 |
QPD8-800-6000-20-S | 0.8 | 6 | 20 | 2 | 2 | 20 | 0.4 | ±5 | 1.35 | SMA | 2~3 |
QPD8-800-8000-30-S | 0.8 | 8 | 30 | 2 | 3.6 | 20 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-870-1005-K3-N | 0.87 | 1.005 | 300 | 300 | 0.6 | 18 | 0.2 | 3 | 1.3 | N | 2~3 |
QPD8-950-2150-30 | 0.95 | 2.15 | 30 | 2 | 3 | 20 | 0.4 | ±4 | 1.25 | SMA, N, TNC, N&SMA | 2~3 |
QPD8-950-2150-30-S-DC | 0.95 | 2.15 | 30 | 1 | 0.6 | 20 | 0.3 | ±3 | 1.25 | SMA | 2~3 |
QPD8-1000-1700-30-S | 1 | 1.7 | 30 | 2 | 0.8 | 22 | ±0.4 | ±4 | 1.25 | SMA | 2~3 |
QPD8-1000-2000-K2-NS | 1 | 2 | 200 | 200 | 0.5 | 12 | 0.5 | 5 | 1.5 | SMA&N | 2~3 |
QPD8-1000-2500-K2-S | 1 | 2.5 | 200 | 200 | 0.9 | 16 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-1000-2500-K2-NS | 1 | 2.5 | 200 | - | 0.5 | 8 | ±0.3 | ±4 | 1.4 | SMA&N | 2~3 |
QPD8-1000-2500-K3-NS | 1 | 2.5 | 300 | 300 | 0.7 | - | 0.5 | 8 | 1.5 | SMA&N | 2~3 |
QPD8-1000-3000-30-S | 1 | 3 | 30 | 2 | 1 | 18 | 0.3 | ±4 | 1.3 | SMA | 2~3 |
QPD8-1000-6000-30 | 1 | 6 | 30 | 2 | 2.1 | 20 | 0.2 | ±4 | 1.25 | SMA, SMP | 2~3 |
QPD8-1000-8000-K1-S | 1 | 8 | 100 | 100 | 1.8 | 20 | 0.4 | 3 | 1.5 | SMA | 2~3 |
QPD8-1000-18000-20-S | 1 | 18 | 20 | 1 | 4 | 15 | ±0.5 | ±10 | 1.8 | SMA | 2~3 |
QPD8-1000-26500-30-S | 1 | 26.5 | 30 | 2 | 5.4 | 18 | ±0.5 | ±7 | 1.6 | SMA | 2~3 |
QPD8-1000-40000-20-K | 1 | 40 | 20 | 2 | 7.3 | 18 | ±0.7 | ±11 | 1.7 | 2.92mm | 2~3 |
QPD8-1000-50000-20-2 | 1 | 50 | 20 | 2 | 9.2 | 18 | ±0.9 | ±14 | 1.8 | 2.4mm | 2~3 |
QPD8-1100-1700-30-T | 1.1 | 1.7 | 30 | 2 | 0.8 | 22 | 0.3 | ±3 | 1.25 | TNC | 2~3 |
QPD8-1270-1460-K8-NS | 1.27 | 1.46 | 800 | 800 | 0.5 | 14 | 0.2 | 3 | 1.5 | SMA&N | 2~3 |
QPD8-1270-1460-1K12-EN | 1.27 | 1.46 | 1120 | 1120 | 0.5 | 14 | 0.2 | 3 | 1.5 | SC&N | 2~3 |
QPD8-1370-30-S | 1.37 | 30 | 2 | 0.8 | 20 | 0.2 | ±3 | 1.2 | SMA | 2~3 | |
QPD8-1500-1700-20-S | 1.5 | 1.7 | 20 | 1 | 0.3 | 20 | ±0.2 | ±4 | 1.25 | SMA | 2~3 |
QPD8-1500-5000-30-S | 1.5 | 5 | 30 | 2 | 1.2 | 20 | ±0.2 | ±2 | 1.3 | SMA | 2~3 |
QPD8-1525-1850-K1-N | 1.525 | 1.85 | 100 | 10 | 0.8 | 18 | 0.3 | ±4 | 1.2 | N | 2~3 |
QPD8-1805-1880-K2-S | 1.805 | 1.88 | 200 | 200 | 0.9 | 18 | 0.2 | 4 | 1.4 | SMA | 2~3 |
QPD8-1850-2700-K25-N | 1.85 | 2.7 | 250 | 15 | 0.8 | 18 | 0.4 | ±4 | 1.3 | N | 2~3 |
QPD8-2000-4000-K16-S | 2 | 4 | 160 | - | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-2000-6000-30 | 2 | 6 | 30 | 2 | 1.2 | 18 | 0.4 | ±4 | 1.3 | SMA, N | 2~3 |
QPD8-2000-6000-K65-7N | 2 | 6 | 650 | 650 | 0.8 | - | 0.4 | 10 | 1.6 | 7/16 DIN&N | 2~3 |
QPD8-2000-8000-30-S | 2 | 8 | 30 | 2 | 1.5 | 20 | 0.4 | ±3 | 1.35 | SMA | 2~3 |
QPD8-2000-10000-30-S | 2 | 10 | 30 | 2 | 2 | 18 | ±0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-2000-18000-20-S | 2 | 18 | 20 | 1 | 3.2 | 16 | 0.5 | ±10 | 1.6 | SMA | 2~3 |
QPD8-2000-26500-20 | 2 | 26.5 | 20 | 1 | 3.2 | 16 | ±0.8 | ±10 | 1.9 | SMA, 2.92mm | 2~3 |
QPD8-2000-40000-20-K | 2 | 40 | 20 | 2 | 5.9 | 18 | ±0.7 | ±10 | 1.7 | 2.92mm | 2~3 |
QPD8-2000-50000-20-2 | 2 | 50 | 20 | 1 | 7.2 | 18 | ±0.8 | ±12 | 1.8 | 2.4mm | 2~3 |
QPD8-2400-6000-30-S | 2.4 | 6 | 30 | 2 | 1.5 | 20 | 0.4 | ±4 | 1.35 | SMA | 2~3 |
QPD8-2700-3100-K2-S | 2.7 | 3.1 | 200 | - | 0.9 | 18 | 0.3 | ±5 | 1.5 | SMA | 2~3 |
QPD8-3000-13000-20-S | 3 | 13 | 20 | 1 | 2 | 18 | ±0.4 | ±6 | 1.4 | SMA | 2~3 |
QPD8-4000-6000-30-S | 4 | 6 | 30 | 2 | 1.2 | 18 | ±0.4 | ±4 | 1.4 | SMA | 2~3 |
QPD8-4000-8000-30-S | 4 | 8 | 30 | 2 | 0.8 | 18 | ±0.3 | ±5 | 1.35 | SMA | 2~3 |
QPD8-4000-12000-20-S | 4 | 12 | 20 | 1 | 1.5 | 18 | 0.2 | ±4 | 1.5 | SMA | 2~3 |
QPD8-4000-18000-30-S | 4 | 18 | 30 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.8 | SMA | 2~3 |
QPD8-4900-5900-30-S | 4.9 | 5.9 | 30 | 2 | 0.8 | 20 | 0.3 | ±3 | 1.3 | SMA | 2~3 |
QPD8-5000-12000-20-S | 5 | 12 | 20 | 1 | 1.2 | 18 | 0.5 | ±5 | 1.4 | SMA | 2~3 |
QPD8-5800-6500-K1-S | 5.8 | 6.5 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-6500-K15-S | 6 | 6.5 | 150 | 150 | 1 | 17 | 0.5 | 5 | 1.5 | SMA | 2~3 |
QPD8-6000-10000-K15-NS | 6 | 10 | 150 | 150 | 1 | - | 0.5 | 10 | 1.8 | SMA&N | 2~3 |
QPD8-6000-12000-20-SM | 6 | 12 | 20 | 1 | 1.5 | 18 | 0.4 | ±5 | 1.5 | SMA | 2~3 |
QPD8-6000-18000-50-S | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-50-SMS | 6 | 18 | 50 | - | 2.4 | 17 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K1-S | 6 | 18 | 100 | - | 2.4 | 15 | ±0.5 | ±8 | 1.8 | SMA | 2~3 |
QPD8-6000-18000-K3-S | 6 | 18 | 300 | 300 | 1.8 | 17 | 0.5 | 5 | 1.75 | SMA | 2~3 |
QPD8-6000-26500-30-S | 6 | 26.5 | 30 | 2 | 2.9 | 18 | ±0.5 | ±6 | 1.6 | SMA | 2~3 |
QPD8-6000-40000-20-K | 6 | 40 | 20 | 1 | 3.2 | 15 | ±0.5 | ±8 | 2.2 | 2.92mm | 2~3 |
QPD8-7130-7245-K1-S | 7.13 | 7.245 | 100 | 100 | 0.9 | 18 | 0.3 | 5 | 1.5 | SMA | 2~3 |
QPD8-8000-9000-K1-S | 8 | 9 | 100 | - | 1.5 | 18 | ±0.5 | ±5 | 1.35 | SMA | 2~3 |
QPD8-8000-12000-20-S | 8 | 12 | 20 | 1 | 1.4 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-11000-20-S | 9 | 11 | 20 | 1 | 1.2 | 18 | 0.4 | ±5 | 1.4 | SMA | 2~3 |
QPD8-9000-45000-R1-2 | 9 | 45 | 0.1 | - | 7 | 15 | ±1 | ±20 | 1.4 | 2.4mm | 2~3 |
QPD8-17000-31000-20-K | 17 | 31 | 20 | 1 | 2 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-26500-20-K | 18 | 26.5 | 20 | 1 | 1.8 | 16 | ±0.5 | ±6 | 1.6 | 2.92mm | 2~3 |
QPD8-18000-40000-20-K | 18 | 40 | 20 | 1 | 3.2 | 16 | ±0.5 | ±8 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-40000-30-K | 18 | 40 | 30 | 1 | 3.6 | 15 | ±0.6 | ±6 | 1.7 | 2.92mm | 2~3 |
QPD8-18000-50000-20-2 | 18 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-18000-50000-20-2-1 | 18 | 50 | 20 | - | 2.5 | 20 | 0.5 | 8 | 1.6 | 2.4mm | 2~3 |
QPD8-24000-44000-20-2 | 24 | 44 | 20 | 1 | 3.6 | 18 | ±0.6 | ±8 | 1.7 | 2.4mm | 2~3 |
QPD8-26500-40000-20-K | 26.5 | 40 | 20 | 2 | 3 | 18 | ±0.5 | ±8 | 1.6 | 2.92mm | 2~3 |
QPD8-26500-50000-20-2 | 26.5 | 50 | 20 | 1 | 4.2 | 18 | ±0.8 | ±10 | 1.8 | 2.4mm | 2~3 |
QPD8-27000-32000-20-K | 27 | 32 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-35350-36150-20-K | 35.35 | 36.15 | 20 | 1 | 1.8 | 18 | ±0.5 | ±8 | 1.5 | 2.92mm | 2~3 |
QPD8-37450-39350-10-K | 37.45~39.35 | 10 | 1 | 2.4 | 15 | ±0.6 | ±6 | 1.6 | 2.92mm | 2~3 | |
QPD8-40000-67000-12-V | 40 | 67 | 12 | 1 | 5.9 | 16 | ±1 | ±12 | 1.9 | 1.85mm | 2~3 |
QPD8-50000-66000-R1 | 50 | 66 | 0.1 | - | 6 | 15 | ±1 | ±20 | 1.4 | - | 2~3 |